For most athletes, the medal is the one thing they take home from an event. It sits on a shelf or hangs from a bedpost long after the scores are forgotten. That makes it one of the most important pieces of any race, tournament or season-end celebration.
Yet for organizers ordering custom medals for the first time, the process can feel opaque. What does "die struck" mean? How long does it take? Why does one quote cost twice as much as another? This guide walks through each stage of production, drawing on how an established medal manufacturer like The Monterey Company, a Bend, Oregon maker of custom race medals, sports medals and challenge coins since 1989, takes a design from rough sketch to finished medal.
"The medal is the one piece of an event that athletes keep for decades, so it should feel like it was made for that race and nobody else," says Eric Turney, President of The Monterey Company. "The organizers who get the best custom race medals are the ones who start early, keep the design focused and treat the ribbon as part of the artwork."
Whether you run a youth soccer league, a community 5K or a state wrestling tournament, the same five steps apply.
Step 1: Plan the Order Before You Design Anything
The best medal orders start with four answers, not a sketch.
Purpose. Is every participant getting a medal, or only the top three finishers? Participation and finisher medals usually share one design in a single large run. Placement medals often share a design but switch the plating (gold, silver, bronze) or the text by place.
Quantity. Count registered athletes, then add a buffer of 5 to 10 percent for late sign-ups, volunteers, sponsors and damaged pieces. Reordering a small batch later often costs more per piece than adding them to the original run, because the setup work is repeated.
Budget. Custom medal pricing moves with size, the number of colors, plating, add-ons and quantity. Larger runs bring the per-piece price down sharply, since the mold cost is spread across more medals. Decide your per-athlete ceiling early so your designer works within it.
Timeline. Count backward from event day. Most custom medals take several weeks from approved artwork to delivery, so the safest window to place an order is 8 to 10 weeks before the event. Rush production exists, but it narrows your options and usually adds cost.
Step 2: Design a Medal Athletes Want to Keep
Shape. Round medals are classic and affordable, but custom shapes stand out. A race in a coastal town might use a wave outline; a basketball tournament might use a ball or a backboard. Most manufacturers can die cut almost any outline, as long as it has no extremely thin points that could bend.
Size. Youth and participation medals typically run 2 to 2.5 inches. Finisher and championship medals usually sit between 2.5 and 3 inches, and marathon medals can go larger. A bigger medal feels more substantial, but it costs more and needs a sturdier ribbon.
Artwork. Keep the front simple: the event name, year, a sport icon and perhaps a logo. Fine text below about 8 points tends to blur in metal. Use the back for details such as the distance, venue, sponsor marks or a short motto. Supply logos as vector files (AI, EPS, PDF or SVG) so the factory can cut clean lines. Using your club's crest and colors also ties the medal to your kit and other club merchandise, so the whole season looks like one brand.
2D or 3D. A 2D design has flat, raised and recessed areas at two or three levels, which suits logos and text. A 3D design is sculpted, giving a runner's muscles or a mountain ridge real depth. 3D sculpting adds artist time and cost, but it produces the medals people photograph and post.
Step 3: Choose the Metal, Plating and Color
Base metal. Most custom sports medals are die cast from zinc alloy. Molten metal is poured into a mold, which handles custom shapes, cutouts and 3D detail well. Iron or brass medals are die struck, stamped from a flat sheet. Die struck medals suit simple round or 2D designs and give crisp edges.
Plating. Plating gives the medal its finish. Shiny gold, silver and bronze are standard for placement medals. Antique finishes darken the recessed areas so raised details pop, a popular look for races and military-themed events. Black nickel, copper and dual plating (two metals on one medal) are good options for a premium feel.
Color. Color is added in the recessed areas of the design:
|
Color option |
What it looks like |
Best for |
|---|---|---|
|
Soft enamel |
Color sits below the metal lines, with a textured feel |
Most events; vivid color at a lower cost |
|
Hard enamel |
Polished flat and level with the metal, smooth and durable |
Championships and keepsakes |
|
Printed (offset) |
Full-color print under a clear epoxy dome |
Photos, gradients, complex logos |
|
Specialty enamel |
Glitter, glow-in-the-dark or translucent color |
Night races, youth events, themed runs |
More colors mean more hand-filling steps, so limit the palette to what the design needs. Four to six colors cover most medals.
Step 4: Add Features and Pick the Ribbon
Add-ons turn a standard medal into a conversation piece. Popular choices include:
-
Spinners: a center disc that rotates, often used for wheels, balls or globes
-
Cutouts: open spaces in the metal, such as a mountain skyline you can see through
-
Bottle openers: a favorite for adult races, beer miles and post-race parties
-
Custom backs: a second design on the reverse instead of a plain finish
-
Engraving or sequential numbering: names, times or serial numbers on each piece
-
Interlocking medals: series medals that fit together across a multi-year challenge
Ribbons. The ribbon is the first thing people see when a medal is hung around their neck, so treat it as part of the design. Sublimated ribbons are printed edge to edge, carrying full-color logos, event names and sponsor marks. Woven or plain stock ribbons cost less and work well for school colors or simple placement medals. Widths of 1.25 to 1.5 inches are standard, and wider ribbons suit heavier medals. Confirm how the ribbon attaches, whether through a sewn loop, a jump ring or a clip, so it hangs straight.
Step 5: From Proof to Podium
Once the design and specs are set, production follows a predictable path.
-
Digital proof. The manufacturer sends a drawing showing size, colors (usually as Pantone codes), plating and the back design. Check spelling, the year and logo placement carefully. This is your last cheap chance to make changes.
-
Mold creation. After approval, a steel mold is cut or a 3D model is sculpted. Some manufacturers can share a photo of a sample at this stage.
-
Casting or striking. Medals are cast or stamped, then trimmed and polished.
-
Plating and color. Each medal is plated, then enamel is filled by hand and cured.
-
Quality control. Good factories check every piece for color bleed, plating flaws and sharp edges.
-
Assembly and packaging. Ribbons are attached and medals are bagged individually, or packed in boxes or velvet pouches for premium awards.
-
Shipping. Allow time for customs and ground freight, and build in a few days of slack before the event.
A typical schedule looks like this:
|
Stage |
Typical time |
|---|---|
|
Quote and design |
3 to 7 days |
|
Proof revisions and approval |
2 to 5 days |
|
Production |
2 to 4 weeks |
|
Shipping |
3 to 10 days |
|
Total |
About 5 to 7 weeks |
Those ranges are why ordering 8 to 10 weeks ahead is the safe bet: it leaves room for a second proof round or a shipping delay. If you are running a race, slot the medal order into your wider event plan; this guide to organizing a 5K covers permits, volunteers and other race-day materials to schedule alongside it.
Medal Ideas by Sport
|
Sport or event |
Design idea |
|---|---|
|
Youth leagues |
Bright soft enamel, the team mascot, one design for every player |
|
5K, half marathon, turkey trot |
Finisher medal with the distance on the back; seasonal themes such as a turkey or snowflake spinner |
|
Tournaments |
One design in gold, silver and bronze, with the place on the ribbon or a back insert |
|
Swim meets |
Wave cutouts, a blue translucent enamel and the stroke or event engraved |
|
Wrestling and gymnastics |
3D athlete figures and the weight class or apparatus on the back |
|
Cheer and dance |
Glitter enamel and a custom-shaped bow or megaphone |
|
Pickleball and tennis |
A paddle or racket shape with a spinning ball |
|
Esports |
A controller outline, neon glow enamel and the season name |
Manufacturers with a long history in medals, like The Monterey Company, can usually share past designs from similar events, which is a fast way to find a direction. For youth programs especially, recognizing every player matters: the average child quits organized sport by age 11, according to Aspen Institute's Project Play, and small moments of recognition help keep kids coming back.
Organizer Checklist
-
Final headcount plus a 5 to 10 percent buffer
-
Per-medal budget, including ribbon and shipping
-
Event date and an order deadline 8 to 10 weeks earlier
-
Logo and artwork in vector format
-
Front and back text proofread by two people
-
Shape, size, plating and color method chosen
-
Ribbon style, colors and width confirmed
-
Digital proof approved in writing
-
Delivery address and receiving contact confirmed
Frequently Asked Questions
How far in advance should I order custom sports medals? Aim for 8 to 10 weeks before your event. Production alone usually takes 2 to 4 weeks after proof approval, and design, revisions and shipping add more. Rush options exist for tight deadlines but limit your choices.
Is there a minimum order quantity? Most custom medal makers set minimums somewhere around 50 to 100 pieces, because each design needs its own mold. Small runs are possible, but the per-piece price is higher.
What affects the cost of a custom medal most? Quantity, size, the number of enamel colors, 3D sculpting, plating choice and add-ons such as spinners or bottle openers. Sublimated ribbons and premium packaging also add to the total. For grassroots clubs, awards are one line in a wider season budget; this guide to setting fair membership fees shows how end-of-season trophies sit alongside league fees, kit and insurance.
Should I choose stock or custom medals? Stock medals with a printed insert are cheaper and faster, which suits small or last-minute events. Custom medals cost more but carry your event's identity, and athletes are far more likely to keep and share them.
Can one medal design work for first, second and third place? Yes. The usual approach is a single mold plated in gold, silver and bronze, with the place shown on the ribbon or the back. That keeps the mold cost down while giving each finisher a distinct award.
The Bottom Line
A great sports medal comes down to planning early, keeping the design focused and choosing finishes that match your event's budget. Start 8 to 10 weeks out, lock your headcount and artwork, and review every proof closely. Do that, and athletes will be hanging your medal on the wall for years.